vishay semiconductors tlvD4200 document number 83058 rev. 1.7, 20-apr-11 www.vishay.com 1 for technical support, please contact: led@vishay.com this document is subject to change without notice. the product described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dh backlighting led in ? 3 mm tinted non-diffused package description the tlvD4200 serie was developed for backlighting in the extrem bright double heterojunction (dh) red gaalas on gaas technology . due to its special shape the spatial distribution of the radiation is qualified for backlighting. to optimize the brightness of backlighting a custom-built reflector ( with scattering) is required. uniform illumination can be enhanced by covering the front of the reflector with diffusor material. this is a bright and flexib le solution for backlighting different areas. product group and package data ? product group: led ? package: 3 mm backlighting ? product series: standard ? angle of half intensity: 85 features ? high brightness ? wide viewing angle ? categorized for luminous flux ? available in dh red ? tinted clear package ? low power dissipation ? low self heating ? rugged design ? high reliability ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec applications ? backlighting of display panels, lcd displays, symbols on switches, keyboards, graphic boards and measuring scales ? illumination of large areas e.g. dot matrix displays ** please see document ?vishay material category policy?: www.vishay.com/doc?99902 19231 parts table part color, luminous flux technology tlvD4200 red, ? v > 40 mlm gaaias on gaas absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit reverse voltage v r 6v dc forward current i f 50 ma surge forward current t p ? 10 s i fsm 1a power dissipation t amb ? 60 c p v 100 mw junction temperature t j 100 c operating temperature range t amb - 40 to + 100 c storage temperature range t stg - 55 to + 100 c soldering temperature t ? 5 s, 2 mm from body t sd 260 c thermal resistance junction/ ambient r thja 400 k/w
www.vishay.com 2 document number 83058 rev. 1.7, 20-apr-11 vishay semiconductors tlvD4200 for technical support, please contact: led@vishay.com this document is subject to change without notice. the product described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note: luminous flux is tested at a cu rrent pulse duration of 25 ms. the above type numbers represent t he order groups which include onl y a few brightness groups. only one group will be shipped on each bag (there will be no mixing of two groups in each bag). in order to ensure availab ility, single brightness gro ups will not be orderable. in a similar manner for colors where wavelength groups are m easured and binned, single wavelength groups will be shipped on any one bag. in order to ensure availability, singl e wavelength groups will not be orderable. typical characteristics (t amb = 25 c, unless otherwise specified) optical and electrical characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit luminous flux i f = 15 ma ? v 40 80 mlm dominant wavelength i f = 10 ma ? d 640 nm peak wavelength i f = 10 ma ? p 650 nm angle of half intensity i f = 10 ma ? 85 deg forward voltage i f = 20 ma v f 1.8 2.2 v reverse voltage i r = 10 ? av r 615 v junction capacitance v r = 0, f = 1 mhz c j 50 pf luminous flux classification group luminous flux (mlm) standard min. max. u 40 80 v 63 125 w 100 200 x 130 260 y 180 360 z 240 480 figure 1. forward current vs. ambient temperature 0 10 20 30 40 60 i f - for w ard c u rrent (ma) t am b - am b ient temperat u re (c) 95 10095 50 0204060 8 0100 figure 2. forward current vs. pulse length 0.02 0.05 0.1 0.2 1 0.5 t p /t= 0.01 t am b 65 c 0.01 0.1 1 10 1 10 100 1000 10 000 t p - p u lse length (ms) 100 95 10047 i - for w ard c u rrent (ma) f
document number 83058 rev. 1.7, 20-apr-11 www.vishay.com 3 vishay semiconductors tlvD4200 for technical support, please contact: led@vishay.com this document is subject to change without notice. the product described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 figure 3. forward current vs. forward voltage figure 4. rel. luminous flux vs. ambient temperature figure 5. rel. luminous flux vs. forw. current/duty cycle 1 10 100 95 10014 1 1.5 2 2.5 3 i f - for w ard c u rrent (ma) v f - for w ard v oltage ( v ) red 0 96 11605 20 40 60 8 0100 t am b - am b ient temperat u re (c) 0 0.4 0. 8 1.2 1.6 2.0 red v rel - relati v e l u mino u s fl u x 10 20 50 100 200 0 0.4 0. 8 1.2 1.6 2.4 96 11606 500 0.5 0.2 0.1 0.05 0.02 1 i f (ma) t p /t 2.0 red i fa v = 10 ma, const. v rel - relati v el u mino u s fl u x figure 6. relative luminous flux vs. forward current figure 7. relative intensity vs. wavelength figure 8. rel. luminous intensity vs. angular displacement for 90 emission angle 0.1 1 10 0.01 0.1 1 10 100 96 11607 i f - for w ard c u rrent (ma) red v rel - relati v e l u mino u s fl u x 600 620 640 660 6 8 0 0 0.2 0.4 0.6 0. 8 1.2 700 95 1001 8 i rel - relati v e l u mino u s intensity - w a v elength (nm) 1.0 red 96 1160 8 i v rel - relati v e l u mino u s intensity 0.4 0.2 0 0.2 0.4 0.6 0.6 0 30 10 20 40 50 60 70 8 0 0. 8 1.0 0. 8 1.0
www.vishay.com 4 document number 83058 rev. 1.7, 20-apr-11 vishay semiconductors tlvD4200 for technical support, please contact: led@vishay.com this document is subject to change without notice. the product described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters 9510953
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
